C170 CLEARWATER Generic Salt Cell BH7000 & 1/2 Half LEAD Replacement Kit

  
CLEARWATER ZODIAC C170 / BH7000. 7 SOLID Plates each 133mm. Solid Plate Cathode & Solid Plate Anode.

Complete with Lock nut + Rubber o'ring. Loose head for easier cleaning base of cell without twisting the leads.

Replaces old cell with no adjustments. This cable kit fits ALL Models of the B & C-Series Cells. B140 C140 B170 C170 B200 C200 B250 C250 B330 C330. It is very important the cell leads are in good condition. Ensure crimping is done with a good crimping tool (do not use pliers).

Place smaller heat shrink over metal crimps. Place large heat shrink over all the terminals. Ensure heat is applied evenly and no terminals are exposed after heating.

If brass plugs are loose fitting then close the female plug slightly. You must have a tight fit. Solid plate is easier to clean. The calcium just falls off. Of the time compared to mesh cathode.

In a cathode they last longer (as they have up to 3 times more material than mesh). There is no problem with using them in place of a mesh cell.

The cell will be replaced in the first 2 years if any manufacture defects are visible.