Swimming Pool Alarm + Remote Receiver Kids Pets Inground & Above Safety Guard

  
Water Motion Sensor & Receiver - The poolside motion sensor detects water surface fluctuations, triggering the remote receiver to sound a critical alarm in the event of a child drowning in the swimming pool. The alarm prompts immediate rescue action with a rapid response time. Wireless Flashing Receiver Alarm - The receiver alarm will give out sounds with LED flashing at the same time when children or pets fall into the pool or pond. The 85 dB alarm will be triggered when a over 13-lb-weight object is detected. Must test the alarm after installation. 4 WORKING MODES - 4 different modes: Surveillance, Swimming, Mute, and Off. Press the button and move to change its working state. This design prevents accidental touches and is suitable for a wider range of scenarios. Swimming Pool Alarm + Remote Receiver Kids Pets Inground & Above Safety Guard. Enhance Your Pool Safety With Our Pool Alarm. Pool Alarm is intended to be an additional layer of security to protect your loved ones. The Pool Alarm is not intended as a life-saving device and is not intended to replace any other safety considerations such as adult supervision, lifeguards, fences, gates, pool covers, locks, etc. The Pool Alarm may not detect gradual entry into the pool. This model has a transmitter and receiver. It is intended to alert you at the pool of any intrusion and will transmit to a receiver located nearby. Powered by 6pcs 1.5V battery. Suitable for pools up to 16x32 sq. Immerse the detection tube about 3.9 inches below the water surface.

Designed to detect objects weighing 13 pounds or more, the alarm is triggered immediately upon accidental immersion, allowing you to respond promptly. AC powered for reliability, the charger is included in the package.

Stay connected to your pool alarm system with up to 300 feet of receiving range. In the event of an alarm activation, the receiver will emit an 85-decibel alert, providing ample volume to grab your attention.

2 INSTALL METHOD - Method #1: Punch holes at the edge of the pool and secure with screws. Method #2: Use strong double-sided adhesive to secure it to the edge of the pool. (All installation accessories are included in the package). Adaptation Pool Type - This poolside alarm is suitable for inground & above ground pool. The poolside unit is suggested to be installed in the pool less than or equal to 16x32sq.

The tube should be submerged under the water surface about 3.9. Not A Life-saving Device - Pool Alarm is just a pool safety alarm system, but not a life-saving device! Any safety consideration such as adult supervision, lifeguards or fences should not be replaced! 1 x Pool Alarm, 1 x Receiver, 1 x Instruction, 1 Set Installation Tool.