IC ICLOVER Pool Alarm Outdoor Inground Immersion Swimming Pool Safety Alarm

  
The installation of the pool alarm requires drilling holes at the edge of the pool to secure its position. Please make sure to prepare an electric drill in advance. Helps you detect the fluctuation of water surface then instantly gives dangerous feedback when something wrong happens in your pool. Alarms and reminds you to implement rescue at a short response time.

The receiver alarm will give out sounds with LED flashing at the same time when children or pets fall into the pool or pond. The 85 dB alarm will be triggered when a 13-lb-weight object is detected.

The poolside unit is suggested to be installed in the pool less than or equal to 16x32sq. And be sure it is installed at the proper place. The tube should be submerged under the water surface about 3.9. Just remember press the button down at first then move the control button to change its working status before setting the poolside unit. It is designed to avoid false operation by children or pets. The IC ICLOVER Pool Alarm is just a pool safety alarm system, but not a life-saving device! Any safety consideration such as adult supervision, lifeguards or fences should not be replaced!