All aluminum tubing hardware needed for the installation. Aluminum casting "spider"(s) to unite the supports. All brackets needed for complete installation. All screws needed for complete installation.All Tie Down Hooks needed for complete installation. The absolute BEST post-sale customer service in the industry. Everything you need (tools not included) to successfully put up your dome comes with this listing with the exception of the lumber base. HOWEVER, this can be picked up at any home supply store at minimal expense. This listing specifically sells a dome kit for. The dome kit is 24 FT x 50 FT. If you LOVE the Fabrico. Sun Domes, and are worried that's all we have. TO CHECK OUT SOME OF OUR OTHER SIZES AND OPTIONS.
WE OFFER 3 TYPES OF DOMES. WE EVEN OFFER SPECIALIZED KITS FOR SPAS AND HOT TUBS! SPECIFICATIONS for this specific kit! Tailor-Made Vinyl and Aluminum Enclosure.
Pool enclosure that is supported by a series of aluminum tubes. Cover is heat-sealed to fit the tubes and this provides a. Tailored fit for your pool.
Sturdy Double-Zipper Door and Windows. The pool enclosure has one door opening with two. Heavy duty two-sided nylon zippers.
As well as FIFTEEN fiberglass screened window flaps/openings. Both the door and the windows come with vinyl tabs.
Solid and Secure Enclosure Framework. Bottom edge of the enclosure is a 24-gauge vinyl. And it has a series of grommets. Are then attached to the grommets and hooked onto the base of the dome.This system ensures that the vinyl enclosure is held securely over the pool framework thus making the Sun Dome sturdy and safe. ALL ITEMS ARE BRAND NEW!! What are the benefits of having a Sun Dome on my pool? Is one of the key. Warms the air and the water with solar heat.
From leaves, bugs, debris and early spring or late summer breezes. Moreover, because your pool is protected, you. Cut down on the use of chemicals and expensive cleaning costs. Is there a Sun Dome to fit my pool?
Or other dome sizes, please. Out of what material(s) is the Sun Dome made? 12-mil double polished clear vinyl. The frame is made of. The enclosure over your pool.
Can I install a Sun Dome myself? Installation time varies depending on the size but even the largest Sun Domes can normally be installed in a single weekend. What about winter weather conditions?Fabrico Sun Domes are meant to extend your swim season. It is strongly recommended that you remove your Sun Dome during stormy winter months as the domes are not designed for snow load. However, some Fabrico pool enclosures have been known to stand up to very severe conditions and still survive. How do I clean my Sun Dome?
We suggest cleaning the Sun Dome with mild soap and water. Dish or car wash soap. Test a small patch first to ensure that the product you selected cleans properly.
Please note: do not use any oil-based products as it will damage the vinyl. There are no cleaning requirements; however, if there is a lot of debris on your Sun Dome, we suggest you clean it before storing. What if my Sun Dome gets punctured or damaged? We supply a patch with every Sun Dome.
When it is sent to you! How do you take down a Sun Dome and how do you store it? In order to take down the Sun Dome, simply unsnap the neoprene cords all the way around the pool and gently tug the cover up and over the frame.
Make sure the cover is. Prior to folding it for storage.Can be rolled up (similarly to a sleeping bag). And it should be stored in a cool, dry place when not in use. Also, cornstarch can be sprinkled between the folds of the vinyl to keep it from sticking together. If a dome cover is wet prior to storing, it may turn milky white.
However, this condition will clear up once the cover is back on the frame and exposed to sunlight. Does my Sun Dome protect me from harmful UV Rays? While it is not intended for sun-protection, it will. With the dome on, but you will. Refer to the picture below for a visual guide of the process.
P a y m e n t. S h i p p i n g. Ships to the continental US only. In 1996, we began our first internet foray as a company. We may not have been named Ameri-Brands Products Inc.
Yet, but the ability to reach out to millions of potential customers via a single low-cost medium was very appealing to us. In 1998, Ameri-Brands Products was formed, and in 2003, we became Ameri-Brands Products Incorporated. Since our first adventure in 1996, we have grown from a simple internet retailer (working in limited quarters) to owning our own office spaces and manufacturing facilities. Oroville, California is our base location and it is where many of our products are designed and made. Thanks to you, all of our original goals and expectations have been met and greatly exceeded!
This year we fully expect to serve many more. We attribute our success to the following. An Extremely Knowledgeable Full-Time Staff. What do we specialize in?If you're searching for discounted prices and you want the best online bargain pricing, you're in the right place! We invite you to compare the quality and value of our merchandise to anybody else's. We offer what you need at a low cost, and we're proud to be a favorite stop for DIY(Do-It-Yourself) enthusiasts and professional dealers alike.
To check out some of our other quality products! Thank YOU for checking out our ad and making us who we are! The item "In-Ground Pool Cover Fabrico Sun Dome- 24 FT x 50 FT Dome- USA MADE" is in sale since Tuesday, June 30, 2020.This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Swimming Pools\In-Ground Pools". The seller is "ameri-brand" and is located in Chicago, Illinois. This item can be shipped to United States.