1.5/2.0 HP Self Primming Swimming Pool Pump for In/Above ground Pool with Strainer
1.5 / 2.0 HP Powerful Self Primming Swimming Pool Pump with ON/OFF Switch for In/Above ground Pool w/ 1.25''&1.5&2.0'' Union. About 1.5HP Swimming Pool Pump without Timer.
: With the advanced impeller and superior internal flow design, this self-priming pool pump achieves a maximum flow rate of 6360 GPH, lifting water flow up to 52.5 ft; Withstands water temperatures up to 122°F. : The pool pump body is constructed from commercial-grade, corrosion-resistant, reinforced thermoplastic for superior strength and durability; The motor shell is made of an aluminum casing for impact resistance and fast heat dissipation; It is IPX5 waterproof and equipped with o-rings for leakage avoidance; Comes with a 38.5 in cord to ensure its safety and energy efficiency. : Equipped with a detachable large filter basket, it effectively filters leaves, debris and large gravel; The transparent cover is convenient for users to check the internal condition at any time and clean up in time; There is a drain plug on the bottom for easy drainage; Note: Please do not turn on the pump without filling the water, or it will cause damage to the mechanical seal and impellers. : The pool pump is equipped with adapters compatible with both 1.5-inch and 2-inch PVC pipe sizes, like V40 and N50, in compliance with US standards (fits 1.25-inch and 1.5-inch PVC Hose); Teflon tape needs to be wrapped between the female and slip unions to seal and prevent leaks; Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation systems, but should not be used with storable pools. : The built-in on/off switch adds convenience, allowing you to control the pump with a simple touch; This feature eliminates the need for manual plugging and unplugging, making it easy to operate; The switch is designed to be waterproof, ensuring reliable performance; This pump also provides thermal protection, ensuring safety use with ultra-low noise.: Always fill the pump with water before turning it on; Check that the drain plug is tightly closed and refill until water overflows; Excess water will prime the system and protect internal parts. 1.5 in Connectors x 2. 2 in Connectors x 2. 1.25 -1.5 in Pipe Fittings x 2. Nozzle Internal Diameter:G1 1/2.
Max Head:52.5 FT. Nozzle External Diameter:G2 1/4.
Power Cord:35.8 in/0.91 m(American three-pin plug). PVC Glue Recommended:PVC Cement, Clear PVC Solvent Glue, Gray PVC Solvent Glue.
Pipe Size:1.5/2.0 in. Package Weight: 29.3 lb. About 2.0HP Swimming Pool Pump. HIGH-PERFORMANCE PUMP: With the advanced impeller and superior internal flow design, this self-priming pool pump achieves a maximum flow rate of 6950 GPH, lifting water flow up to 60.0 ft; Withstands water temperatures up to 122°F; The 2 HP 1500W DOE-certified motor is equipped with copper wire that can keep the pump efficient and extend its lifespan. DURABLE & UL CERTIFIED: The pool pump body is constructed from commercial-grade, corrosion-resistant, reinforced thermoplastic for superior strength and durability; The motor shell is made of an aluminum casing for impact resistance and fast heat dissipation; It is IPX5 waterproof and equipped with o-rings for leakage avoidance; Comes with a 38.5 in cord to ensure its safety and energy efficiency.
EFFICIENT WORK, FAST DRAIN: Equipped with a detachable large filter basket, it effectively filters leaves, debris and large gravel; The transparent cover is convenient for users to check the internal condition at any time and clean up in time; There is a drain plug on the bottom for easy drainage; Note: Please do not turn on the pump without filling the water, or it will cause damage to the mechanical seal and impellers. EASY OPERATION: The pool pump is equipped with adapters compatible with both 1.5-inch and 2-inch PVC pipe sizes, like V40 and N50, in compliance with US standards (fits 1.25-inch and 1.5-inch PVC Hose); Teflon tape needs to be wrapped between the female and slip unions to seal and prevent leaks; Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation systems, but should not be used with storable pools. ON/OFF SWITCH FOR EASY CONTROL: The built-in on/off switch adds convenience, allowing you to control the pump with a simple touch; This feature eliminates the need for manual plugging and unplugging, making it easy to operate; The switch is designed to be waterproof, ensuring reliable performance; This pump also provides thermal protection, ensuring safety use with ultra-low noise. IMPORTANT NOTE: Never turn on the pump without first filling it with water to avoid damage to mechanical seals and impellers; It is very important to check if the pump is filled with water before turning it on; First, check if the drain plug off the pump is inserted, and if so, fill more water into it; The excess water will seep into the pipeline and help generate suction.
Item Weight: 25.4 pounds.