Swimming Pool Inground

2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor
2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor
2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor
2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor
2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor  2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor. Open Box - Never Used - No Manuals. Does not direct connect to Intex type pool hoses, will need PVC adapters or hard-line connection. Maintain a crystal clear and sparkling pool or spa that everybody loves with the new SPPE series self-priming 1850W electric swimming pool pump. Locate the pump as close as possible to the pool.

The pump suction line should not be smaller than the pressure line. All piping must be airtight 3. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal.

After the pump tank has been filled with water, and the motor started, allow a few moments for the pump to start delivering water. The installation must be according to the normal power indicated on the label.

The amperage must not at any time exceed the value indicated on the label It is recommended that you consult a state-registered electrician. Place the pump in a dry area with good ventilation.

The ambient temperature must not exceed 40 The pumps are only suitable for counter-clockwise rotation when viewing from the pump end. Three phase motors can rotate in either direction. Interchanging any of the cables on a three-phase motor will reverse the rotation.

Momentarily start, or bump the motor without water in the tank, to check the rotation of the pump shaft. Before disconnecting electrical connections, shut off electricity at its source. Newer work on pump without making certain the power is OFF. This appliance is not intended for use by persons, including children with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible for their safety Children should be supervised to ensure that they do not play with the appliance. The item "2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor" is in sale since Monday, October 4, 2021.

This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps". The seller is "aloftpro" and is located in Chesapeake, Virginia.

This item can be shipped to United States.
  • Speed: Single-Speed
  • Warranty: Lifetime
  • Color: Black
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Suitable For: Above Ground Pools
  • Certification: UL Certification
  • Brand: VIPSHOPMARKET
  • Pool Type: In Ground &Above Ground
  • Type: Pool Pump
  • Max. Flow: 560 L/min
  • Qmax: 560 L/min
  • Power Cord: 59"
  • Amper: 16A
  • Horsepower: 2.5HP
  • Manufacturer Warranty: Lifetime
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Voltage: 110 V
  • Frequency: 60HZ
  • Rated Power: 1850W/2.5HP
  • Motor Shaft Material: Stainless Steel
  • Hmax: 21 Meter
  • Power: 1850w

2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor  2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor